BDFIA-8600 flow injection analyzer is a new generation of flow injection analysis system developed by Beijing Baode Instrument Co., Ltd independently. Multi-parameter can be analyzed simultaneously because the patented integral designs were used in BDFIA-8600.The instrument can work automatically including sampling, sample online preprocessing, chemical reaction, detection, data report, etc..
Measurement items
Volatile phenol, Cyanide, Total cyanide, Total phosphorus, Total nitrogen, Soluble sulfide, Nitrate, Nitrite, Permanganate index, Ammonia nitrogen, Silicate, Anionic surfactant, Orthophosphate, Hexavalent chromium,Fluoride, Urea, Total Alkalinity, Total Hardness, Acidity, Chroma, Calcium, Magnesium, Formaldehyde etc..
Application areas
Water quality analysis (drinking water, public sewage, industrial wastewater, surface water, ground water, waste water, etc.)
Environmental analysis (soil analysis, plant analysis)
Food analysis
Fertilizer analysis
Beverage and alcohol analysis
Technical Index
1 Integral design, sampling, reaction and detection parts are all in one instrument. The analyzer can work independently without host and autosampler.
2 One 42-position autosampler is used in each channel.
3 High-sensitivity and dual-beam detector with low detection limit and good repeatability are used in each channel.
4 One 12-port non-adjustable peristaltic pump is used in each channel.
5 Runs up to 16 channels for high productivity analysis dedicated operation.
6 In-line sample preparation methods for analytes like cyanide, ammonia and surfactants (MBAS) available.
7 1cm and 2cm flow cell can be used.
8 The successful application of the FIA theory significantly shortens the analysis time and greatly improves the analysis efficiency.
9 LAN, WiFi communication mode.
10 Program-controlled heating module and UV digestion module, the panel displays in real time, and the setting can be easily completed with a click of the mouse.
11 Preparation of standard samples and dilution of high concentration samples can be realized by using proportional dilution valve. The dilution can be realized when sample was absorbed in the sample coil without stopping the analyzer. the dilution factor is 1-20 times.
12 Determination of parameters such as cyanide, total cyanide, volatile phenol and anionic surfactant.
13 Compliance with EPA and ISO standards.
Performance
1 | Technical index of volatile phenol |
1.1 | Method principle: 4-aminoantipyrine spectrophotometry |
1.2 | Linear range:0.001mg/L-0.2mg/L |
1.3 | Detection limit: ≤0.0003mg/L |
1.4 | Sample analysis frequency:20samples/hour |
1.5 | Repeatability: ≤1% |
1.6 | Accuracy: The error is within ± 3% |
3 | Technical index of (Total) cyanide |
3.1 | Method principle: Isotonic acid barbituric acid spectrophotometry |
3.2 | Linear range:0.001mg/L-0.2mg/L |
3.3 | Detection limit: ≤0.0005mg/L |
3.4 | Sample analysis frequency:20 samples/hour |
3.5 | Repeatability: ≤1% |
3.6 | Accuracy: The error is within ± 3% |
4 | Technical index of Anionic surfactant |
4.1 | Method principle: Methylene blue photometry |
4.2 | Linear range:0.02mg/L-2mg/L |
4.3 | Detection limit: ≤0.01mg/L |
4.4 | Sample analysis frequency:20 samples/hour |
4.5 | Repeatability: ≤1% |
4.6 | Accuracy: The error is within ± 3% |
Last：BDFIA-100 Shipboard Flow Injection Analyzer
Next：No Data
